Before Starting Work Critical - Ask these from user

MANDATORY — Do NOT write or modify any code until every item below is answered by the user:

• RPC URL provided or a fallback agreed upon (for any on-chain or tx-building step)
• Signer wallet public key (fee payer / crank caller)
• Framework confirmed (Next.js, Express, CLI scripts only, other)
• Coin mint address provided
• Operation type confirmed: inspect fee destination, collect (crank) fee, distribute shared fees, check distributable amount, or create/update sharing config

You MUST ask the user for ALL unchecked items in your very first response. Do not assume defaults. Do not proceed until the user has explicitly answered each one.

API (preferred) — https://fun-block.pump.fun

Use the API to build fee transactions instead of running scripts directly. The API handles account resolution, sharing config detection, and graduation status automatically.

POST /agents/collect-fees

Builds a transaction to collect or distribute creator fees. Automatically detects whether the coin uses a sharing config and builds the appropriate transaction (collect for direct creator, distribute for sharing config).

Request body:

{
  "mint": "<TOKEN_MINT>",
  "user": "<PUBKEY>",
  "frontRunningProtection": false,
  "tipAmount": 0,
  "encoding": "base64"
}

Only mint and user are required.

tipAmount is a Jito tip in SOL (e.g. 0.0001 for 100,000 lamports). Only relevant when frontRunningProtection is true.

Encoding: The API defaults to "base58" encoding. Always pass "encoding": "base64" in the request body — scripts already output base64. When sending the signed transaction to an RPC or Jito endpoint, the encoding used to serialize the transaction must match the encoding parameter passed in the send call. Mismatched encodings will cause transaction failures. Always explicitly pass encoding: "base64" in sendTransaction / simulateTransaction RPC calls — never rely on the RPC's default.

Response:

{
  "transaction": "<base64-encoded VersionedTransaction>",
  "creator": "<base58 creator address>",
  "isGraduated": true,
  "usesSharingConfig": false
}

POST /agents/sharing-config

Builds a transaction to create or update a fee sharing config for a coin. Auto-detects create vs update mode based on on-chain state.

Request body:

{
  "mint": "<TOKEN_MINT>",
  "user": "<PUBKEY>",
  "shareholders": [
    { "address": "<PUBKEY>", "bps": 5000 },
    { "address": "<PUBKEY>", "bps": 5000 }
  ],
  "mode": "create",
  "frontRunningProtection": false,
  "tipAmount": 0,
  "encoding": "base64"
}

Only mint, user, and shareholders are required. mode is auto-detected if omitted. bps values must total exactly 10,000 (100%). Maximum 10 shareholders.

tipAmount is a Jito tip in SOL (e.g. 0.0001 for 100,000 lamports). Only relevant when frontRunningProtection is true.

Response:

{
  "transaction": "<base64-encoded VersionedTransaction>",
  "mode": "create",
  "sharingConfigAddress": "<base58>",
  "shareholderCount": 2,
  "shareholders": [{ "address": "<base58>", "bps": 5000 }, { "address": "<base58>", "bps": 5000 }],
  "isGraduated": true
}

Runnable examples (Node scripts — only when user explicitly requests)

Use {baseDir} as the path to this skill folder (OpenClaw and Agent Skills clients often expose this placeholder).

cd {baseDir}
npm install
export SOLANA_RPC_URL=https://rpc.solanatracker.io/public

Operation	Script	Example
Fetch coin state (HTTP)	scripts/fetch-coin.mjs	node scripts/fetch-coin.mjs --mint <MINT> --subset
Inspect fee destination & vault balances	scripts/fetch-fee-info.mjs	node scripts/fetch-fee-info.mjs --mint <MINT>
Collect creator fee (direct, no sharing)	scripts/build-collect-fee-tx.mjs	node scripts/build-collect-fee-tx.mjs --mint <MINT> --user <PUBKEY>
Distribute shared fees (sharing config)	scripts/build-distribute-fees-tx.mjs	node scripts/build-distribute-fees-tx.mjs --mint <MINT> --user <PUBKEY>
Check distributable amounts (simulation)	scripts/fetch-distributable-info.mjs	node scripts/fetch-distributable-info.mjs --mint <MINT>
Create or update sharing config	scripts/build-sharing-config-tx.mjs	node scripts/build-sharing-config-tx.mjs --mint <MINT> --user <PUBKEY> --shareholders '<JSON>'

• Run any script with --help for full flags (--compute-units, --priority-micro-lamports, --front-runner-protection, --tip-sol, etc.).
• Tx builders print one JSON object on stdout with transaction (base64-encoded VersionedTransaction). Never pass end-user private keys into these scripts.
• OpenClaw: If YAML metadata ever fails to parse, collapse metadata to a single-line JSON object per OpenClaw skills; optional metadata.openclaw.requires.env: ["SOLANA_RPC_URL"] can gate load-time eligibility.

Safety Rules

• NEVER log, print, or return private keys or secret key material.
• NEVER sign transactions on behalf of a user — scripts build txs; the user (or their wallet) co-signs and sends.
• Always validate that addresses are valid base58 public keys before building instructions.
• Use the correct decimal precision: 9 decimals for SOL (1 SOL = 1,000,000,000 lamports), 6 decimals for pump tokens.
• NEVER trust token_program from the HTTP API (coins-v2). Always fetch the mint account on-chain via connection.getAccountInfo(mint) and use .owner to determine the correct token program (SPL Token or Token-2022).
• Verify imports: use @pump-fun/pump-sdk / @pump-fun/pump-swap-sdk (not internal monorepo paths). In TypeScript apps, BN from bn.js matches what the SDKs expect (Anchor BN is the same type in practice).

Program IDs

Program	ID
Pump	6EF8rrecthR5Dkzon8Nwu78hRvfCKubJ14M5uBEwF6P
Pump AMM	pAMMBay6oceH9fJKBRHGP5D4bD4sWpmSwMn52FMfXEA
Pump Fees	pfeeUxB6jkeY1Hxd7CsFCAjcbHA9rWtchMGdZ6VojVZ

Environment Variables

SOLANA_RPC_URL=https://rpc.solanatracker.io/public
NEXT_PUBLIC_SOLANA_RPC_URL=https://rpc.solanatracker.io/public

The default public mainnet RPC (https://api.mainnet-beta.solana.com) often cannot send transactions. Confirm an HTTPS RPC with the user. Examples: Solana Tracker public RPC, Ankr https://rpc.ankr.com/solana.

Install

Inside this skill folder (includes scripts):

cd {baseDir}
npm install

Inside another app (from scratch):

npm install @pump-fun/pump-sdk @pump-fun/pump-swap-sdk @solana/web3.js@^1.98.0 @solana/spl-token bn.js

Check npm info @pump-fun/pump-sdk dependencies and align @solana/web3.js / @solana/spl-token versions to avoid duplicate incompatible copies.

SDK setup (minimal)

import {
  PUMP_SDK,
  OnlinePumpSdk,
  hasCoinCreatorMigratedToSharingConfig,
  creatorVaultPda,
  feeSharingConfigPda,
  canonicalPumpPoolPda,
  bondingCurvePda,
} from "@pump-fun/pump-sdk";
import {
  OnlinePumpAmmSdk,
  coinCreatorVaultAuthorityPda,
  coinCreatorVaultAtaPda,
  getPumpAmmProgram,
} from "@pump-fun/pump-swap-sdk";
import { Connection, PublicKey } from "@solana/web3.js";
import { NATIVE_MINT, TOKEN_PROGRAM_ID } from "@solana/spl-token";

const connection = new Connection(process.env.SOLANA_RPC_URL!);
const onlinePump = new OnlinePumpSdk(connection);

Full transaction building (compute budget, blockhash, partial sign) is implemented in scripts/lib/tx-build.mjs and scripts/lib/compute.mjs.

Fee destination logic

When an agent needs to understand where creator fees go for a coin, follow this decision tree:

1. Fetch bonding curve + check for pool (graduated?)
2. Read isCashbackCoin from pool (if graduated) or bonding curve (if not)
   ├─ isCashbackCoin === true
   │   → Fees go to TRADERS as cashback (via userVolumeAccumulator)
   │   → No creator vault — fees are returned to traders as trading cashback
   │   → Use `POST /agents/collect-fees` with the user's wallet to claim their cashback
   │   → Claims from pump program; also claims from pump AMM (with WSOL unwrap) if graduated
   │
   └─ isCashbackCoin === false
       3. Check hasCoinCreatorMigratedToSharingConfig({ mint, creator })
          ├─ true → Fees go to SHARING CONFIG SHAREHOLDERS
          │   → Load feeSharingConfigPda(mint) → decodeSharingConfig
          │   → Lists shareholders with address + BPS shares
          │   → The pool/bonding curve creator == feeSharingConfigPda(mint) when migrated
          │   → Use `POST /agents/collect-fees` to distribute; only use build-distribute-fees-tx.mjs if the user explicitly requests scripts
          │
          └─ false → Fees go to COIN CREATOR directly
              → Creator = pool.coinCreator (graduated) or bondingCurve.creator
              → Creator vault = creatorVaultPda(creator)
              → Use `POST /agents/collect-fees` to collect; only use build-collect-fee-tx.mjs if the user explicitly requests scripts

Script: fetch-fee-info.mjs resolves this entire tree and outputs the destination.

PDAs and accounts

PDA	Seed	Program
creatorVaultPda(creator)	"creator-vault" + creator	Pump
feeSharingConfigPda(mint)	"sharing-config" + mint	Pump Fees
coinCreatorVaultAuthorityPda(creator)	AMM-derived	Pump AMM
coinCreatorVaultAtaPda(authority, NATIVE_MINT)	ATA	SPL Token
canonicalPumpPoolPda(mint)	Pool PDA	Pump AMM
bondingCurvePda(mint)	"bonding-curve" + mint	Pump

Vault balance calculation

Creator fee vault balance is the sum of two sources:

1. Pump creator vault (native SOL): creatorVaultPda(creator) lamports minus rent exemption (890,880 lamports)
2. AMM creator vault (WSOL token account): coinCreatorVaultAtaPda(coinCreatorVaultAuthorityPda(creator), NATIVE_MINT) token balance

Total available = (1) + (2)

When a sharing config exists, creator is feeSharingConfigPda(mint) (the sharing config PDA address).

Collecting fees (no sharing config)

• Script: scripts/build-collect-fee-tx.mjs
• Uses OnlinePumpSdk.collectCoinCreatorFeeInstructions(creator, payer)
• This calls both:
  1. Pump program collectCreatorFee — moves SOL from creatorVaultPda(creator) to creator wallet
  2. Pump AMM collectCoinCreatorFee — moves WSOL from AMM vault to creator's WSOL ATA (creates ATA if needed)
• Permissionless — anyone can call this to trigger fee collection to the creator

Parameters (build-collect-fee-tx.mjs)

Parameter	Type	Description
--mint	PUBKEY	Coin mint address
--user	PUBKEY	Transaction fee payer
--creator	PUBKEY	(Optional) Creator to collect for; auto-derived from on-chain state if omitted
--compute-units	int	Override compute unit limit
--priority-micro-lamports	int	Override priority fee
--front-runner-protection	flag	Add Jito tip; send ONLY to Jito endpoints
--tip-sol	float	Jito tip in SOL (default 0.0001)

Distributing fees (with sharing config)

• Script: scripts/build-distribute-fees-tx.mjs
• For graduated coins (pool exists):
  1. Create WSOL ATA for sharing config authority (idempotent)
  2. transferCreatorFeesToPump() — AMM program moves WSOL from AMM vault to pump creator vault
  3. PUMP_SDK.distributeCreatorFees({ mint, sharingConfig, sharingConfigAddress }) — splits vault balance to shareholders
• For ungraduated coins (bonding curve only):
  1. PUMP_SDK.distributeCreatorFees(...) only
• Permissionless — anyone can trigger distribution

Parameters (build-distribute-fees-tx.mjs)

Parameter	Type	Description
--mint	PUBKEY	Coin mint address
--user	PUBKEY	Transaction fee payer
--compute-units	int	Override compute unit limit
--priority-micro-lamports	int	Override priority fee
--front-runner-protection	flag	Add Jito tip; send ONLY to Jito endpoints
--tip-sol	float	Jito tip in SOL (default 0.0001)

Creating or updating a sharing config

• Script: scripts/build-sharing-config-tx.mjs
• Create mode: Sets up a new fee sharing config for a coin. The coin creator must sign.
  1. PUMP_SDK.createFeeSharingConfig({ creator, mint, pool }) — initializes config
  2. PUMP_SDK.updateFeeShares(...) — sets the desired shareholder split
• Update mode: Modifies shareholders on an existing config. The admin must sign.
  1. PUMP_SDK.updateFeeShares({ authority, mint, currentShareholders, newShareholders }) — updates split
• Auto-detects create vs update from on-chain state; use --mode to force.
• Important: Reward split updates are effectively one-time. Once updated, the config may no longer be editable (depending on version and admin revocation status). Verify the final split before submitting.
• Shareholders are passed as a JSON array: [{"address":"<PUBKEY>","bps":5000},...]
• bps = basis points (1 bps = 0.01%). Total must equal exactly 10,000 (100%).
• Maximum 10 shareholders. No duplicate addresses.

Parameters (build-sharing-config-tx.mjs)

Parameter	Type	Description
--mint	PUBKEY	Coin mint address
--user	PUBKEY	Fee payer (creator for create, admin for update)
--shareholders	JSON	JSON array of {"address":"<PUBKEY>","bps":<int>} objects
--mode	create|update	(Optional) Force create or update; auto-detected if omitted
--compute-units	int	Override compute unit limit
--priority-micro-lamports	int	Override priority fee
--front-runner-protection	flag	Add Jito tip; send ONLY to Jito endpoints
--tip-sol	float	Jito tip in SOL (default 0.0001)

Checking distributable amounts

• Script: scripts/fetch-distributable-info.mjs
• Simulation-only: does NOT send a transaction
• Uses PUMP_SDK.getMinimumDistributableFee via simulateTransaction
• Returns decoded result: minimumRequired, distributableFees, canDistribute
• Also reads vault balances (pump + AMM sides) and graduation status

Compute units and priority fees

Defaults match the pump.fun app constants (see scripts/lib/constants.mjs in this skill):

Operation	Default compute units
Collect fee (direct creator)	200_000
Distribute fees (sharing config)	200_000

Scripts accept --compute-units to override.

Priority fee: If --priority-micro-lamports is omitted, scripts call Solana JSON-RPC getPriorityFeeEstimate on a draft serialized transaction (with a 100k microlamport floor and an upper cap — see scripts/lib/compute.mjs). Many RPCs support this; if not, the floor is used.

Transaction assembly and send

After the user wallet signs, choose the send path based on whether frontRunnerProtection is true in the script output JSON.

Default (no front-runner protection)

const signature = await connection.sendRawTransaction(
  signedTransaction.serialize(),
  { skipPreflight: false, preflightCommitment: "confirmed" },
);
const latestBlockhash = await connection.getLatestBlockhash("confirmed");
await connection.confirmTransaction(
  { signature, ...latestBlockhash },
  "confirmed",
);

With front-runner protection (Jito only)

When the transaction was built with --front-runner-protection, it already contains a Jito tip instruction. Send it only to Jito block engine endpoints — do not send via connection.sendRawTransaction or any other RPC, as that would leak the transaction to the public mempool and defeat the protection.

import { sendTransactionToJito } from "./lib/jito.mjs";

const txBase64 = Buffer.from(signedTransaction.serialize()).toString("base64");
const result = await sendTransactionToJito(txBase64);

Or manually via fetch (no dependency on the lib):

const JITO_ENDPOINTS = [
  "https://mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://amsterdam.mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://frankfurt.mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://ny.mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://tokyo.mainnet.block-engine.jito.wtf/api/v1/transactions",
];

const txBase64 = Buffer.from(signedTransaction.serialize()).toString("base64");
const body = JSON.stringify({
  jsonrpc: "2.0", id: 1, method: "sendTransaction",
  params: [txBase64, { encoding: "base64" }],
});

await Promise.any(
  JITO_ENDPOINTS.map((url) =>
    fetch(url, {
      method: "POST",
      headers: { "Content-Type": "application/json" },
      body,
    }).then((r) => r.json()),
  ),
);

Then confirm as usual with connection.confirmTransaction.

Get coin data (HTTP)

GET https://frontend-api-v3.pump.fun/coins-v2/{mint}

CORS-protected: frontend-api-v3.pump.fun does not allow browser-origin requests. When building a web application, always call this endpoint from your backend/server and proxy the result to the frontend. Do not call it directly from client-side JavaScript.

{
  "mint": "ABcDeFgHiJkLmNoPqRsTuVwXyZ123456789abcdefg",
  "name": "MyToken",
  "symbol": "MTK",
  "description": "A sample token on pump.fun",
  "image_uri": "https://ipfs.io/ipfs/Qm...",
  "metadata_uri": "https://ipfs.io/ipfs/Qm...",
  "creator": "CreatorWalletAddress...",
  "created_timestamp": 1700000000,
  "complete": false,
  "bonding_curve": "BondingCurveAddress...",
  "associated_bonding_curve": "AssociatedBondingCurveAddress...",
  "pump_swap_pool": null,
  "token_program": "TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb",
  "market_cap": 25000000000,
  "usd_market_cap": 50000,
  "virtual_sol_reserves": "30000000000",
  "virtual_token_reserves": "1073000000000000",
  "total_supply": "1000000000000000",
  "raydium_pool": "",
  "program": "pump",
  "reply_count": 42,
  "last_trade_timestamp": 1700086400
}

NEVER trust token_program from the HTTP API. The coins-v2 endpoint may return a stale or incorrect token_program. Always resolve it on-chain by fetching the mint account and reading its owner:

const mintAccountInfo = await connection.getAccountInfo(mintPublicKey);
const tokenProgram = mintAccountInfo.owner; // TOKEN_PROGRAM_ID or TOKEN_2022_PROGRAM_ID

The skill scripts already do this via tokenProgramIdFromMint() in scripts/lib/coin-resolve.mjs. Any custom integration must do the same.

Error handling and troubleshooting

• Cashback coin — isCashbackCoin === true: no creator vault, but users can claim their trading cashback via POST /agents/collect-fees. The endpoint builds a transaction that claims from the pump program, and also from the pump AMM (with WSOL unwrapping) if the coin has graduated. fetch-fee-info.mjs returns feeDestination: "cashback".
• Sharing config not active — the account at feeSharingConfigPda(mint) may not exist or may be in a non-active state; fetch-fee-info.mjs will report hasSharingConfig: false.
• Vault below minimum distributable threshold — fetch-distributable-info.mjs returns canDistribute: false and shows minimumRequired vs actual balance.
• Bonding curve account missing — wrong mint, wrong network, or uninitialized coin.
• Pool not found (not graduated) — coin is still on bonding curve; AMM-side fees do not exist yet.
• RPC errors — rate limits, missing getPriorityFeeEstimate, or send blocked; try another RPC; pass --priority-micro-lamports explicitly.

End-to-end flow

1. Confirm coin mint address, signer wallet, and operation type; set SOLANA_RPC_URL.
2. Run fetch-fee-info.mjs --mint <MINT> to inspect fee destination (cashback, sharing_config, or creator), vault balances, and sharing config shareholders if applicable.
3. Based on feeDestination:
   • "cashback" → Use POST /agents/collect-fees with the user's wallet to claim their trading cashback (claims from pump program + pump AMM if graduated).
   • "creator" → Use POST /agents/collect-fees to build a crank transaction. Only use build-collect-fee-tx.mjs if the user explicitly requests scripts.
   • "sharing_config" → Use POST /agents/collect-fees to distribute. Only use fetch-distributable-info.mjs and build-distribute-fees-tx.mjs if the user explicitly requests scripts.
   • To create or update a sharing config → Use POST /agents/sharing-config. Only use build-sharing-config-tx.mjs if the user explicitly requests scripts.
4. Capture transaction from the script output.
5. Deserialize with @solana/web3.js VersionedTransaction.deserialize, have user sign.
6. Send the transaction: If frontRunnerProtection is true in the script output JSON, send only to Jito endpoints (see "Transaction assembly and send" above). Otherwise use sendRawTransaction + confirmTransaction.