Create Jira Issue

!${CLAUDE_PLUGIN_ROOT}/bin/accelerator config context --skill create-jira-issue --fail-safe

Configuration: Set work.integration: jira and work.default_project_code: <KEY> in .accelerator/config.md to enable auto-scoping. See the ### work section of configure/SKILL.md for the full reference.

Create a new Jira issue via POST /rest/api/3/issue. Work through the steps below in order. This skill never auto-invokes — it only runs when the user explicitly types /create-jira-issue.

This skill never synthesises --body content from upstream context (issue descriptions, web fetches, prior tool output) without explicit user approval — body content always comes from the user's prompt or a path the user named.

Two modes

This skill accepts either a work-item file or the explicit flag set:

• Work-item-file mode — the argument is a path to a meta/work/ work item. The summary, body, type, and project are derived from the work item, and the created issue's key is written back into its external_id. Follow the Work-item-file mode section.
• Flag-driven mode — the argument is the --project/--type/--summary/… flag set (no work-item file). Follow Steps 1–9; it writes nothing back to any file.

Both modes share one create contract: read/preview/confirm/create, mirroring /create-linear-issue in shape.

Work-item-file mode

WF-1: Resolve the issue type and project

Run the read-only resolver against the work-item file (pass --project KEY only if the user explicitly overrode it):

${CLAUDE_PLUGIN_ROOT}/bin/accelerator jira resolve-fields --file <work-item-file>

Run the bare launcher directly as an executable; never prefix it with bash/sh/env and never pipe its output. It prints one tab-separated line <issue_type>\t<issue_type_source>\t<project>\t<project_source>. This is the kind→issue-type map and project resolution read from the config crate — the same resolution path accelerator work create --push --dry-run renders (it emits the same fields prefixed by the tracker name), so the two entry points can never disagree. Handle a non-zero exit before any preview or create:

• E_RESOLVE_ALREADY_SYNCED — the work item already carries a non-empty external_id. STOP; tell the user it is already synced and name the existing identifier. Make no API call.
• E_RESOLVE_NO_PROJECT — the project is unresolvable. STOP and tell the user to pass --project KEY or set work.default_project_code. This is a pre-create failure — do not proceed to the confirm gate.

On success, capture the four resolved values and continue.

WF-2: Preview the resolved intent

Read the work item's title (the summary) and Markdown body (the description). Show, under Proposed Jira write — review before sending:

• the resolved issue type, and — when issue_type_source is default — that the kind fell through, e.g. kind "spike" → Task (default);
• the resolved project and which source it came from (project_source);
• the summary and the (≤500-char-truncated) description.

WF-3: Confirm before writing

Ask the user to reply y to confirm, or anything else to abort: Create this Jira issue and set the work item's external_id? Exactly y/yes proceeds; anything else aborts with "Aborted — no Jira write was made."

WF-4: Create and write back

On confirmation, create via the bare-key projection, writing the work item's body to a file for --body-file:

${CLAUDE_PLUGIN_ROOT}/bin/accelerator jira create --project <project> --type <issue_type> --summary "<title>" --body-file <body-path> --emit key

--emit key prints only the bare issue key on success. Branch fail-closed:

• a bare key on a clean run — the issue exists remotely. Write it into the work item's external_id (insert the line if absent):

  ${CLAUDE_PLUGIN_ROOT}/bin/accelerator work link-external-id <work-item-file> <KEY>
  

  Then report Issue created: <KEY> — the work item's external_id is now <KEY>.

• E_REQ_BAD_RESPONSE on stderr — the issue was created remotely but its key is unusable. Do not write external_id; surface this loudly, give the user the key, and tell them NOT to re-run (it would create a duplicate) and to reconcile external_id by hand.

• any other non-zero exit — no issue was created. Do not write external_id; report the error. The file is unchanged, so it is safe to fix and retry.

The create-then-writeback sequence is non-atomic: if the create succeeds but the work link-external-id writeback fails, surface it loudly — the issue exists remotely as <KEY>, the user must NOT blindly re-run (it would duplicate), and they should set external_id: <KEY> by hand.

Step 1: Parse the flag set

Read the argument string and note each flag:

• --project KEY — Jira project key (e.g. ENG)
• --type NAME / --issuetype-id ID — issue type by name or numeric id (the id wins); one is required
• --summary TEXT — single-line summary (required)
• --body TEXT / --body-file PATH — Markdown description
• --assignee @me|ACCTID / --reporter @me|ACCTID — @me resolves via site.json; an email is refused
• --priority NAME, --label NAME (repeatable), --component NAME (repeatable), --parent KEY
• --custom SLUG=VALUE — repeatable; custom field by slug, @json:<literal> for arrays/objects

Step 2: Resolve --project

If --project was not supplied, the subcommand reads work.default_project_code from config. If neither is set the create refuses before any call; warn the user to supply --project KEY or run /init-jira and set a default project.

Step 3: Trust-boundary enforcement

Before assembling --body, verify that any body content comes ONLY from text the user typed in this turn or a file path they explicitly named this turn — never a previously-fetched description, a web fetch, or a prior assistant message. If their phrasing implies "use the description from above", ask them to paste or confirm the literal text first.

Step 4: Preview the resolved intent

Show, under Proposed Jira write — review before sending: the project, issue type, summary, the (≤500-char-truncated) description, and every resolved field (assignee/reporter/priority/labels/components/parent/custom). @me and custom slugs resolve inside the subcommand and are refused before any write if unresolvable.

Step 5: Confirm before writing

Ask the user:

Send this to Jira? Reply y to confirm, n to revise, anything else to abort.

A clear y/yes proceeds; a n/revise stays in review (re-apply Step 3 to any revised body); anything ambiguous aborts with "Aborted — no Jira write was made."

Step 6: Send the request

${CLAUDE_PLUGIN_ROOT}/bin/accelerator jira create [all flags from Steps 1-2]

Step 7: Render the response

The subcommand emits a JSON envelope {key} with a top-level outcome keyword. On the created keyword, present:

Issue created:

Step 8: Error handling

On a non-zero exit, show the error, which names its cause on stderr:

• E_CREATE_NO_SUMMARY — --summary is required;
• E_CREATE_BAD_FIELD — a --custom value failed validation; run /init-jira --refresh-fields if a field id was rejected;
• E_CREATE_NO_SITE_CACHE — @me was used but site.json is missing; run /init-jira;
• E_CREATE_BAD_ASSIGNEE — --assignee/--reporter accepts @me or a raw accountId, not an email;
• an auth or transport failure — suggest checking credentials with /init-jira.

Step 9: Examples

Example — minimal task User: /create-jira-issue --project ENG --type Task --summary "Fix login timeout" Skill previews the resolved intent, waits for y, then creates and renders Issue created: ENG-456.

Example — custom field with @json escape User: /create-jira-issue --project ENG --type Task --summary "Sprint task" --custom sprint=@json:[42] Skill coerces the sprint field as a JSON array literal, previews, confirms.

!${CLAUDE_PLUGIN_ROOT}/bin/accelerator config instructions create-jira-issue --fail-safe