ferrox-graphify

STOP -- DO NOT READ THIS FILE. You are already reading it. This prompt was injected into your context by Claude Code's command system. Using the Read tool on this file wastes tokens. Begin executing Step 0 immediately.

CJS-only (graphify): graphify subcommands are not registered on ferrox-tools query. Use the ferrox_run launcher shim (defined in each bash block below) or invoke the binary directly: node <runtime-home>/ferrox-core/bin/ferrox-tools.cjs graphify … where <runtime-home> is your runtime's config directory (e.g. ~/.claude, ~/.hermes, ~/.cursor). See docs/CLI-TOOLS.md for details. Other tooling may still use ferrox-tools query where a handler exists.

Step 0 -- Banner

Before ANY tool calls, display this banner:

Ferrox > GRAPHIFY

Then proceed to Step 1.

Step 1 -- Config Gate

Check if graphify is enabled by reading .planning/config.json directly using the Read tool.

DO NOT use the ferrox-tools config-get command -- it hard-exits on missing keys unless --default is passed.

1. Read .planning/config.json using the Read tool
2. If the file does not exist: display the disabled message below and STOP
3. Parse the JSON content. Check if config.graphify && config.graphify.enabled === true
4. If graphify.enabled is NOT explicitly true: display the disabled message below and STOP
5. If graphify.enabled is true: proceed to Step 2

Disabled message:

Ferrox > GRAPHIFY

Knowledge graph is disabled. To activate:

  node <runtime-home>/ferrox-core/bin/ferrox-tools.cjs config-set graphify.enabled true

Then run /ferrox-graphify build to create the initial graph.

---

Step 2 -- Parse Argument

Parse $ARGUMENTS to determine the operation mode:

Argument	Action
build	Run inline build (Step 3)
query <term>	Run inline query (Step 2a)
status	Run inline status check (Step 2b)
diff	Run inline diff check (Step 2c)
No argument or unknown	Show usage message

Usage message (shown when no argument or unrecognized argument):

Ferrox > GRAPHIFY

Usage: /ferrox-graphify <mode>

Modes:
  build           Build or rebuild the knowledge graph
  query <term>    Search the graph for a term
  status          Show graph freshness and statistics
  diff            Show changes since last build

Step 2a -- Query

Run:

_FERROX_SHIM_NAME="ferrox-tools.cjs"; _FERROX_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; if [ -f "$FERROX_TOOLS" ]; then ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif command -v ferrox-tools >/dev/null 2>&1; then FERROX_TOOLS="$(command -v ferrox-tools)"; ferrox_run() { "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; else echo "ERROR: ferrox-tools.cjs not found at $FERROX_TOOLS and ferrox-tools is not on PATH. Run: npx -y ferrox-factory@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${FERROX_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${FERROX_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
ferrox_run graphify query <term>

Parse the JSON output and display results:

• If the output contains "disabled": true, display the disabled message from Step 1 and STOP
• If the output contains "error" field, display the error message and STOP
• If no nodes found, display: No graph matches for '<term>'. Try /ferrox-graphify build to create or rebuild the graph.
• Otherwise, display matched nodes grouped by type, with edge relationships and confidence tiers (EXTRACTED/INFERRED/AMBIGUOUS)

STOP after displaying results. Do not spawn an agent.

Step 2b -- Status

Run:

_FERROX_SHIM_NAME="ferrox-tools.cjs"; _FERROX_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; if [ -f "$FERROX_TOOLS" ]; then ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif command -v ferrox-tools >/dev/null 2>&1; then FERROX_TOOLS="$(command -v ferrox-tools)"; ferrox_run() { "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; else echo "ERROR: ferrox-tools.cjs not found at $FERROX_TOOLS and ferrox-tools is not on PATH. Run: npx -y ferrox-factory@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${FERROX_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${FERROX_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
ferrox_run graphify status

Parse the JSON output and display:

• If exists: false, display the message field
• Otherwise show last build time, node/edge/hyperedge counts, and STALE or FRESH indicator
• If built_at_commit is non-null, also display a Source commit: line:
  • commit_stale === false (rebuilt at HEAD): Source commit: <built_at_commit> (current)
  • commit_stale === true (graph behind HEAD): Source commit: <built_at_commit> (<commits_behind> commits behind HEAD)
  • commit_stale === null (unreachable commit / no git): Source commit: <built_at_commit> (freshness unknown)
• If built_at_commit is null (pre-graphify-v0.7 graph), omit the source-commit line entirely — do not render "Source commit: unknown"

The mtime-based STALE/FRESH flag and the commit-based commit_stale measure different things and can disagree (e.g., a CI-built graph rebuilt minutes ago against an old checkout reads as FRESH on mtime but commit_stale: true). Surface both so the agent can choose.

STOP after displaying status. Do not spawn an agent.

Step 2c -- Diff

Run:

_FERROX_SHIM_NAME="ferrox-tools.cjs"; _FERROX_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; if [ -f "$FERROX_TOOLS" ]; then ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.claude/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${_FERROX_RUNTIME_ROOT}/.codex/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif command -v ferrox-tools >/dev/null 2>&1; then FERROX_TOOLS="$(command -v ferrox-tools)"; ferrox_run() { "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${HERMES_HOME:-$HOME/.hermes}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEX_HOME:-$HOME/.codex}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}" ]; then FERROX_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/ferrox-core/bin/${_FERROX_SHIM_NAME}"; ferrox_run() { node "$FERROX_TOOLS" "$@"; }; else echo "ERROR: ferrox-tools.cjs not found at $FERROX_TOOLS and ferrox-tools is not on PATH. Run: npx -y ferrox-factory@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${FERROX_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${FERROX_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
ferrox_run graphify diff

Parse the JSON output and display:

• If no_baseline: true, display the message field
• Otherwise show node and edge change counts (added/removed/changed)

If no snapshot exists, suggest running build twice (first to create, second to generate a diff baseline).

STOP after displaying diff. Do not spawn an agent.

---

Step 3 -- Build (Inline)

Run the pre-flight check first: