Step 0.5 — Argument Parsing

Read $ARGUMENTS as plain text:

• If it contains --clear-all: set clear-all intent. Go directly to the # Clear Mode section (after the save path's Completion Confirmation). Do not continue into Step 0 and do not write a handover.
• If it contains --clear: set clear-last intent. Go directly to # Clear Mode. Do not continue into Step 0 and do not write a handover.
• Precedence: --clear-all > --clear. The string --clear-all contains --clear, so test for --clear-all first; when it is present, clear the clear-last intent and delete every file, not just the newest.
• If it is empty, or contains neither flag: proceed to Step 0 and run the save path below, unchanged.

Both flags delete files and write nothing. Everything from Step 0 through the Completion Confirmation is the save path and does not run in Clear Mode.

---

Step 0 — Gather Git Context

!`git rev-parse --is-inside-work-tree 2>/dev/null || echo "NO_GIT"`

!`git status --short 2>/dev/null || echo "NO_GIT"`

!`git diff --stat 2>/dev/null || echo "NO_GIT"`

If any block above returned NO_GIT, this directory is not a git repository. Print: > No git repository detected -- skipping branch/commit context. Continue — git context is optional. Treat all git-sourced fields as empty.

---

Session Freshness Check

Before generating a handover, determine whether this session produced meaningful work worth preserving. You must prove substance exists — do not assume it.

Step 1 — Enumerate Meaningful Work

Review the full conversation and list every meaningful action taken during this session. Write this list as a Decision Log before choosing a branch.

Counts as meaningful work:

• Code created, edited, or deleted (file writes, not just reads)
• Bug investigated with findings or conclusions
• Architectural or design decisions made
• Multi-step debugging with a diagnosis
• Configuration changes applied
• Tests written, run, or fixed
• Plans created or refined with concrete next steps

Does NOT count as meaningful work:

• The /quiver:handover command itself and its git context-gathering commands
• Reading files solely to answer a quick question with no follow-up action
• Greetings, small talk, or simple Q&A with no project impact
• Pre-existing git dirty state from a prior session (changes that were already there when this session started)
• Exploring or browsing code without reaching conclusions or decisions

Step 2 — Decision Log

Output the following before choosing a branch. The branch labels are internal routing and never reach the user (R7) -- name the outcome in words instead.

Session check — is there work worth handing over? Meaningful actions found:

• {list each meaningful action, or "None"} Outcome: {writing a handover | nothing to hand over, skipping}

Branch A — No Meaningful Work (skip handover)

If the meaningful actions list is empty:

Handover skipped — This session has no meaningful work to summarize. A handover file was not created.

When to run this command:

• After making code changes, investigating bugs, or making decisions
• At the end of a productive work session
• Before closing a session you would like to resume later

Stop here. Do not create the handover directory, do not write any files, and do not proceed to the Handover Instructions below.

Branch B — Meaningful Work Exists (create handover)

If the meaningful actions list has at least one item, proceed to the Handover Instructions section below and generate the full handover.

---

Handover Instructions

Your role: You are a session handover specialist. Your goal is to produce a zero-re-discovery handover — the next session should never re-investigate what this session already learned. Be specific: include file paths, function names, line numbers, and exact error messages.

If git context was not available (see Step 0), build the handover from the conversation context alone and note "Git not available" in the Summary.

Workflow:

┌─────────────────┐     ┌──────────────────┐     ┌──────────────────┐
│ 1. GATHER       │ ──► │ 2. BUILD         │ ──► │ 3. SAVE & VERIFY │
│ Read git status  │     │ Write 8 sections │     │ Write file       │
│ Review convo     │     │ Check quality    │     │ Prune old files  │
│ Identify files   │     │ gates            │     │ Update MEMORY.md │
└─────────────────┘     └──────────────────┘     └──────────────────┘

Using the context above and our conversation, prepare a structured handover note with these exact sections:

Summary

{One-paragraph TL;DR. Include: what feature/bug was worked on, current status (done / in-progress / blocked), and branch name if applicable. Example:}

Implemented JWT refresh token rotation on feature/auth-refresh. All tests passing; PR ready for review.

What Was Done

{Bulleted list. Each item: file path + what changed. Example:}

• src/auth.ts — Added JWT refresh token rotation
• tests/auth.test.ts — Added 3 test cases for token expiry

What We Tried / Dead Ends

{Approaches that didn't work and why. Include enough detail to prevent re-investigation. Example:}

• Tried using jsonwebtoken v8 but it lacks rotateRefresh() — downgraded to v7 API

Bugs & Fixes

{Issues found and how they were resolved. Include file paths and line numbers. Example:}

• src/auth.ts:42 — Off-by-one in token expiry calculation; changed >= to >

Key Decisions (and Why)

{Architectural choices made this session. State the alternatives considered. Example:}

• Chose Redis over in-memory cache for token blacklist — survives server restarts

Gotchas / Things to Watch Out For

{Non-obvious constraints, traps, or environment quirks. Example:}

• AUTH_SECRET env var must be ≥32 chars or the signing silently falls back to HS256

Next Steps

{Ordered list — first item is the highest priority action for the next session. Example:}

1. Open PR for feature/auth-refresh and request review
2. Add rate limiting to /token/refresh endpoint

Important Files Map

{Key files and their roles in the current work. Example:}

• src/auth.ts — Main authentication module (token issue + refresh)
• config/redis.yml — Token blacklist store configuration

If a section has no content, write N/A — {reason} instead of omitting the heading.

---

Quality Gates

Before saving, verify the handover passes these checks:

BLOCKING (fix before saving):

• Summary is not empty
• Next Steps has at least one item
• What Was Done references at least one file path

WARNING (review if session was longer than ~15 minutes):

• What We Tried / Dead Ends is empty — long sessions usually have dead ends worth noting

---

Anti-Patterns

• Don't write vague summaries like "worked on auth stuff" — include the specific feature and current status.
• Don't paste full file contents into the handover — summarize changes with file paths and line references.
• Don't skip updating MEMORY.md — it's the cross-session index.
• Don't leave Next Steps empty — every session has a logical continuation.

---

Save to Disk (Required)

After writing the handover above, do all of the following:

1. Write handover file

Get a timestamp: run date '+%Y-%m-%d_%H-%M-%S' via Bash. Create directory: .claude/handovers/ in the project root (if it doesn't exist). Write the full 8-section handover to: .claude/handovers/{timestamp}.md Verify: Read back the file to confirm it was written correctly.

2. Prune old handover files

List all .md files in .claude/handovers/, sorted by name (newest first). Delete all files beyond the 3 most recent. Verify: Re-list the directory and confirm only ≤3 files remain.

3. Update MEMORY.md

In the project memory file, update (or add) a ## Last Handover section:

## Last Handover
- file: .claude/handovers/{timestamp}.md <!-- handover-sourced -->
- summary: {one sentence from the Summary section} <!-- handover-sourced -->

Verify: Read MEMORY.md to confirm the update.

4. Save any active plan

If there is an unsaved implementation plan in context, save it to PLAN.md. Skip if already current.

Completion Confirmation

After all saves, output this confirmation:

Handover saved: .claude/handovers/{timestamp}.md Files retained: {comma-separated list of kept handover files} MEMORY.md updated: yes/no Ready to close the session.

---

Clear Mode

Reached only from Step 0.5, when $ARGUMENTS carried --clear or --clear-all. This path deletes handover files and never writes one. Ignore the git context from Step 0 — it has no bearing on a delete.

Step C1 — Inventory

Use the Glob tool to list .claude/handovers/*.md. Sort the results by filename descending (newest first, since filenames are timestamps). This listing is the only source of truth for what gets deleted; do not add a second listing mechanism.

Branch A — No Files

If the listing errors (e.g., "No such file or directory"), is empty, or contains no .md files:

No handover files found — nothing to delete.

Stop here. Do not create the directory, do not call AskUserQuestion, do not run any rm.

Branch B — Files Exist

Resolve the deletion set from the intent set in Step 0.5:

• clear-last (--clear): the first .md file in the sorted listing — the most recent one. Exactly one file.
• clear-all (--clear-all): every .md file in the listing.

Step C2 — State the Deletion Set

Print the full inventory before asking anything. The user must see every filename that is about to be removed, not a count.

For clear-last:

Target: {filename} Remaining after deletion: {count - 1} handover file(s)

For clear-all:

Files to delete ({count}): {bulleted list of every .md filename in the deletion set}

Step C3 — Confirm (Required)

Ask with the AskUserQuestion tool — never plain text.

For clear-last:

• Question: "Delete {filename}? This cannot be undone."
• Options: ["Yes, delete it", "Cancel"]

For clear-all:

• Question: "Delete all {count} handover file(s)? This cannot be undone."
• Options: ["Yes, delete all", "Cancel"]

Only proceed on the affirmative option. On "Cancel", print and stop:

Cancelled — no files were deleted.

Nothing is removed on the cancel path: no rm, no MEMORY.md edit, no output template.

Step C4 — Delete

Run exactly one command with the Bash tool, matching the intent:

• clear-last:

  rm .claude/handovers/{filename}
  

• clear-all:

  rm -f .claude/handovers/*.md
  

Step C5 — Verify the Delete (Required)

Re-list .claude/handovers/ with Glob and compare against the deletion set.

• clear-last: the target filename is gone and every other file from the Step C1 inventory is still present. If the target is still listed, the delete failed — report the failure and stop, do not print the output template.
• clear-all: zero .md files remain. Confirm: Directory clean — 0 handover files. If any remain, report which ones and stop.

Step C6 — Memory Cleanup

Read the auto-memory file (MEMORY.md in your memory directory). Using the Edit tool, remove only the lines containing the <!-- handover-sourced --> marker. Leave every other entry untouched. Count the removed lines as {N} and report:

Also removed {N} handover-sourced references from MEMORY.md.

If no matching lines were found, skip this message entirely.

Step C7 — Output Template

For clear-last:

Deleted: {filename} Remaining: {count - 1} handover file(s)

For clear-all:

Purged: {count} handover file(s) Files deleted: {comma-separated filenames} Status: Clean slate.

Fill every {...} from the Step C1 inventory — Step C5's re-list verifies the delete, it does not supply these values. No raw {placeholder} may survive into the printed output.

Clear Mode Anti-Patterns

• Don't delete without printing the filenames first — a count alone does not tell the user what they are losing.
• Don't skip the AskUserQuestion confirmation, even under an automated test. Both deletes are irreversible.
• Don't treat --clear-all as --clear because the substring matches. Step 0.5 resolves precedence; honor it.
• Don't skip the re-list in Step C5 — without it a failed rm is reported as a success.
• Don't create .claude/handovers/ on the delete path. A missing directory is Branch A, not an error to repair.