model-can-it-fit

Use this for a pre-launch VRAM calculator: whether a Hugging Face model can fit on an Intel GPU at a requested quantization, context length, concurrency, runtime, and tensor-parallel degree. Input: HF model id, quantization, context length, concurrency, target VRAM. Output: a per-component breakdown and a verdict.

The skill runs a CPU-only calculator. It does not need to deploy the model on an Intel GPU, but it MUST check the Intel GPU VRAM memory space and may need Hub access unless the user provides a local config.json or params.json.

Use And Route

Use this skill when the user asks:

• whether a model fits on an Intel GPU or XPU
• what max context or concurrency is memory-feasible
• how VRAM splits across weights, KV cache, activations, and runtime
• whether a vLLM/SGLang launch is likely to OOM before trying it

Use another skill instead when the user asks for:

• measured speed, TTFT, TPOT, or tokens/sec: use a benchmark skill
• an exact launch configuration or performance recommendation: use model-config-recommend
• diffusion fit: use torch-xpu-bench empirically
• live GPU readiness: use xpu-runtime-preflight or xpu-discover

Inputs To Collect

Ask for or infer:

• model id or local config path
• target GPU VRAM per device -- if the target is this host, measure it (see "Measure VRAM first" below) instead of asking the user
• runtime: vllm, sglang, or torch
• quantization: bf16, fp16, fp8, int8, int4, int3, int2, or mxfp4
• context length and concurrency
• tensor parallel degree if multiple XPUs are planned
• vLLM --gpu-memory-utilization value if this is launch planning

For gated Hugging Face repos, use HF_TOKEN or HUGGING_FACE_HUB_TOKEN. For repeatable tests, prefer local config snapshots.

Measure VRAM First

--device-vram-gb is required and has no default. Confirm which card the host actually has before choosing a value -- never assert VRAM from a remembered spec sheet:

xpu-smi discovery -d 0 | grep -i 'Device Name\|Memory Physical Size'

Then pass that SKU's whole-GB figure from the table below (24480.00 MiB confirms a 24 GB B60). Bare xpu-smi discovery (no -d) prints no memory field at all -- it lists device names and PCI ids only. Do not summarise it as though it reported VRAM.

Also read the free memory, because another workload may already own the card:

xpu-smi discovery -d 0 -j | grep -E 'memory_(physical_size|free_size)_byte'

If the target hardware is not attached to this host, use the same table and say in the answer that the card is a stated spec, not one you confirmed.

SKU	PCI id	--device-vram-gb
Arc Pro B70	0xe223	32
Arc Pro B65	0xe221	32
Arc Pro B60	0xe211	24
Arc Pro B50	0xe220	16
Arc B580	0xe20b	12

For --tp greater than 1, check every device in the intended set and pass the smallest one -- a TP group is limited by its smallest card. The same applies to --tp-sweep: measure enough devices to cover its largest degree.

Run

From the skillpack repo root:

python3 scripts/fit.py \
    --model Qwen/Qwen2.5-7B-Instruct \
    --quant bf16 --ctx 8192 --concurrency 4 \
    --runtime vllm --device-vram-gb 24 \
    --gpu-memory-utilization 0.9 \
    --tp-sweep 1,2,4

When running from inside this skill directory, the shorter equivalent is:

python3 scripts/fit.py \
    --model Qwen/Qwen2.5-7B-Instruct \
    --quant bf16 --ctx 8192 --concurrency 4 \
    --runtime vllm --device-vram-gb 24

For a local config:

python3 scripts/fit.py \
    --model /path/to/model/config.json \
    --quant bf16 --ctx 8192 --concurrency 4 \
    --runtime vllm --device-vram-gb 24

For a quick common-model table:

python3 scripts/fit.py \
    --table --runtime vllm --device-vram-gb 32

The 24 in the examples is an Arc Pro B60; substitute the SKU you confirmed. If the script errors with --device-vram-gb is required, that is the guard working -- go check the device, do not pick a plausible number.

Interpret Results

Report the verdict and the binding constraint first.

State where the VRAM figure came from: measured on device N, or a spec value for hardware you could not query. Never present a recalled number as if it were measured.

Free memory can be far below physical VRAM on a shared host. The verdict is computed against the figure you passed, so if memory_free_size_byte showed the card already occupied, a FITS verdict is not a promise that a launch right now will succeed -- say so, and point at an idle device with ZE_AFFINITY_MASK.

For a pass, include:

• total VRAM estimate
• usable VRAM if --gpu-memory-utilization was supplied
• headroom in GB and percent
• max concurrency or max context memory ceiling if relevant

For a fail, include:

• deficit in GB
• largest component: weights, KV cache, activations, or framework
• the script's first mitigation: lower context, lower concurrency, lower KV dtype, quantize weights, or increase TP

Do not present the result as measured GPU memory. It is a config-derived estimate intended to prevent obvious OOMs before launch.

Runtime Planning Rules

Use the same --gpu-memory-utilization that the runtime launch will use. For vLLM launch planning, 0.9 is a common starting point; the script's default 1.0 answers only whether bytes fit in physical VRAM.

If quantization is omitted, the script auto-detects known quantization_config.quant_method values from the model config. For quantized weights, the script auto-pairs KV dtype with fp8 unless the user overrides --kv-dtype.

Tensor parallelism divides weights and KV cache per device in this estimator, and --device-vram-gb is per device. The script does not know which cards the launch will land on, so confirm N XPUs exist with xpu-smi discovery, pass the smallest card's VRAM, and name the intended devices in the answer via ZE_AFFINITY_MASK.

Gotchas

• Do not calculate VRAM by hand in the final answer. Run scripts/fit.py; if a new repeated calculation is needed, add script support or a fixture.
• Never state a card's VRAM from memory, and never summarise xpu-smi discovery as though it reported memory -- the bare form does not print any memory field. xpu-smi discovery -d <id> does. Assert VRAM only from tool output you actually ran.
• Pass the SKU's whole-GB figure (B60 = 24), but treat it as nameplate. fit.py computes with GB = 1024 ** 3, so 24 is read as 24 GiB while the card holds 24480 MiB -- ~96 MiB optimistic -- and the driver's allocatable ceiling is ~5% below physical (22.71 GiB on a B60). Both gaps run the same direction. Omitting --gpu-memory-utilization makes the script print Usable VRAM: all of it (physical-fit only) plus a Note: spelling this out; relay it rather than reporting the verdict alone, and re-run with the launch's real value before trusting a tight FITS.
• An overstated VRAM figure is worse than an understated one: it yields a FITS verdict for a launch that OOMs at engine init. When unsure between two values, pass the lower.
• ZE_AFFINITY_MASK is not CUDA_VISIBLE_DEVICES -- an out-of-range index crashes the Level Zero loader rather than being ignored. Confirm device ids with xpu-smi discovery before recommending a mask.
• This is a config-derived estimate, not measured XPU memory or throughput. Use benchmark/profile skills for measured behavior.
• Match --gpu-memory-utilization to the planned runtime launch; the default 1.0 is only a physical-fit answer.
• Report auto-detected quantization and KV dtype so the user knows which assumptions drove the verdict.
• Route diffusion fit and tight VLM image-memory questions to empirical checks instead of treating this estimate as complete.

References

• Read references/coverage-and-formulas.md when checking model class support, formula details, MoE/head-dim behavior, mixed precision, quick-reference verdicts on Arc Pro B70, or why an estimate differs from another calculator.
• Read references/runtime-caveats.md when planning dtype/KV choices, handling VLM or diffusion edge cases, or explaining what this skill intentionally does not predict.