Pair Programming Skill

Use Announce-Show-Wait-Apply-Verify when the user wants to review each change before it is applied. Any domain agent can execute. Stay in the interactive main session; a fork cannot conduct these user gates.

Instructions

Session Setup

1. Read the request and relevant code.
2. Show a numbered plan with one logical change per step.
3. Wait for acknowledgment; incorporate requested additions, removals, or reordering.

Track current step, remaining steps, and speed. Announce each change as “Step N of ~M.”

Micro-Step Protocol (Per Change)

1. Announce the change and reason in 1–2 sentences.
2. Show the proposed diff or code block, including trivial changes. Default: 15 lines; hard cap: 50. Split larger changes into named sub-steps such as 3a, 3b, and 3c.
3. Wait for an explicit control command.
4. Apply only after ok, yes, or y.
5. Verify with relevant checks and report the result in one sentence. Use verification-before-completion for check selection and evidence; keep project-required checks.

Command	Action
ok / yes / y	Apply current step, then propose the next
no / n	Skip this step and propose an alternative
faster	Double step size, up to 50 lines; show any revised proposal and wait
slower	Halve step size, down to 5 lines; show any revised proposal and wait
skip	Skip current step and move to the next
plan	Show remaining steps
done	End pairing and run final verification

Speed and navigation commands do not approve a code change. Split changes by logical unit as well as size; announce the split before showing its first part.

Speed Adjustment

Apply and acknowledge speed changes immediately: “Speed adjusted to ~N lines per step.”

Setting	Lines per step	Trigger
Slowest	5	Repeated slower
Slow	7	slower from default
Default	15	Session start
Fast	30	faster from default
Fastest	50	Repeated faster

Session End

When the user says done or all steps finish, run required final checks and relevant checks not already valid for the final state. Include a full suite when the project requires it or the changes warrant it. Report completed and skipped steps, changed files, check results, and unfinished work. Ending pairing does not complete skipped work.

Examples

For a Go CSV parser, a plan might cover the record struct, parser, error handling, tests, and integration. Show the plan and wait. Propose an 8-line CSVRecord struct, wait for ok, apply, and verify. Repeat for the parser.

After faster at the default speed, show up to 30 lines per step; slower then returns to 15. If the user ends after step 4 of 6, run relevant Go checks such as go vet and go test ./..., then report the two remaining steps with the results.

Error Handling

User Says "Just Do It" / Wants Autonomous Mode

An explicit request to finish autonomously changes the mode. Acknowledge it and continue the remaining authorized work without micro-step approvals. Ask only if the requested mode is unclear.

Verification Fails After a Step

Propose the fix as the next micro-step: announce, show, wait, apply, and recheck. Keep the interactive approval contract until the user changes mode.

Step Too Large to Fit Size Limit

Split into logical sub-steps within the current limit. Announce the split and seek approval for each sub-step.

References

• Micro-step controls
• Speed settings