Skills.
Give your AI a better way to work.
A skill is a set of written instructions that teaches an AI how to do one job the way it should be done: review a pull request, plan a migration, write the release notes.
Install one here and it travels with your account into Claude, Claude Code, Cursor and every other client you sign in with.
Category: Productivity
2,669 results · page 24 of 89
- View details
plan-featureSkillProductivity
Plan a feature from BRD-lite brief or clear intent into PRD (What), decisions, implementation plan, and task slices.
Ready to connect★ 565
- View details
sdlcSkillProductivity
Route a task to the next synced SDLC workflow based on current artifacts and repo state.
Ready to connect★ 565
- View details
verify-bugSkillProductivity
Post-merge UAT verification workflow. Walks JIRA reproduce steps, performs comparative audits (Before/After), attaches evidence to JIRA, and transitions status on PASS.
Ready to connect★ 565
- View details
loop-workerSkillProductivity
Autonomously work a `.pm` workstream to completion — pick the next pending milestone, implement every task end to end, /ship it, then move to the next until none remain. Use when the user asks to "loop", drain, or work through a whole workstream's backlog (e.g. `/loop-worker w1`). Sequential, not in
Ready to connect★ 561
- View details
scrum-master/task-breakdownSkillProductivity
Task breakdown method for decomposing requirements into actionable development tasks
Ready to connect★ 556
- View details
catchupSkillProductivity
Summarize and review what changed while you were away. Use after a weekend, vacation, or flight to check missed PRs, git commits, Linear tickets, and meetings — one prioritized brief, not a firehose.
Ready to connect★ 551
- View details
elixir-idiomsSkillProductivity
OTP/BEAM patterns and Elixir idioms — GenServer, Supervisor, Task, Registry,
Ready to connect★ 551
- View details
helpSkillProductivity
Choose Phoenix review, plan, debug, or test command. Use when user asks which /phx: command or plugin skill handles a task; do not route only to a domain skill. NEVER for bare /help; NOT for ambiguous requests (use intent-detection) or a plugin tour.
Ready to connect★ 551
- View details
phx-workSkillProductivity
Execute Elixir/Phoenix plan tasks with progress tracking. Use after /skill:phx-plan
Ready to connect★ 551
- View details
Maestro PlanSkillProductivity
Use when creating, revising, or verifying an execution plan for a phase or task
★ 550
- View details
- View details
task-listSkillProductivity
Use when user asks to write a task list, not to do a task
Ready to connect★ 543
- View details
- View details
oncallSkillProductivity
Pigweed oncall rotation runbooks and maintenance workflows (such as rolling CIPD client tools for b/315378787). DO NOT auto-load during normal coding tasks. Only load when explicitly triggered by the user via the `/oncall` or `/roll-cipd` slash command.
Ready to connect★ 539
- View details
pw_async2SkillProductivity
Best practices for pw_async2 development and testing, covering futures, values, tasks, dispatchers, polling, and coroutines.
Ready to connect★ 539
- View details
ralph-specum-implementSkillProductivity
This skill should be used only when the user explicitly asks to use `$ralph-specum-implement`, or explicitly asks Ralph Specum in Codex to run implementation for approved tasks, quick mode, or an explicit continue request.
Ready to connect★ 538
- View details
ralph-specum-tasksSkillProductivity
This skill should be used only when the user explicitly asks to use `$ralph-specum-tasks`, or explicitly asks Ralph Specum in Codex to run the tasks phase.
Ready to connect★ 538
- View details
reality-verificationSkillProductivity
This skill should be used when the user asks to "verify a fix", "reproduce failure", "diagnose issue", "check BEFORE/AFTER state", "VF task", "reality check", "check test quality", "mock-only tests", or needs guidance on verifying fixes by reproducing failures before and after implementation, or det
Ready to connect★ 538
- View details
speckit-workflowSkillProductivity
Comprehensive understanding of the spec-kit methodology. Constitution-driven feature development with specify, plan, tasks, and implement phases.
Ready to connect★ 538
- View details
create-heartbeatSkillProductivity
Create a new heartbeat (proactive agent scheduled with a decision prompt) for EvoNexus. Guides the user through picking an agent, setting interval, wake triggers, and the decision prompt that governs when the agent acts. Writes to config/heartbeats.yaml with pydantic validation. Use when the user sa
Ready to connect★ 535
- View details
create-routineSkillProductivity
Create a new automated routine (ADW) for the scheduler. Guides the user through defining what the routine does, the type (AI or systematic), the schedule, and generates the Python script + Makefile target. Use when the user says 'create a routine', 'add a routine', 'automate this', 'schedule this ta
Ready to connect★ 535
- View details
dev-ccgSkillProductivity
Tri-model orchestration — run the same task through Claude + Codex + Gemini in parallel and synthesize the best answer. Use for high-stakes decisions where multi-model consensus reduces single-model bias.
Ready to connect★ 535
- View details
dev-ralphSkillProductivity
Persistence loop — keep working on a task until it's resolved or until a circuit breaker stops you. Different from /loop (which is time-based) — ralph is iteration-based with state.
Ready to connect★ 535
- View details
dev-teamSkillProductivity
On-demand spawning of multiple engineering agents in parallel for large-context work. Use when a task is too big for a single agent and the work can be split into independent streams.
Ready to connect★ 535
- View details
int-linear-reviewSkillProductivity
Review Linear projects — check issues in review, blockers, stale items, sprint progress, and assigned tasks. Use when user says 'check linear', 'linear review', 'sprint status', 'issues in review', 'project status', 'what is blocked', or any reference to checking project/issue status in Linear.
Ready to connect★ 535
- View details
int-sync-meetingsSkillProductivity
Sync meetings from Fathom — fetch new recordings, save JSON, generate transcripts and summaries, update indexes. Use when user says 'sync meetings', 'sync fathom', 'update meetings', 'sync calls', or similar.
Ready to connect★ 535
- View details
int-todoistSkillProductivity
Manage tasks and projects in Todoist. Use when user asks about tasks, to-dos, reminders, or productivity.
Ready to connect★ 535
- View details
legal-meeting-briefingSkillProductivity
Prepare structured briefings for meetings with legal relevance and track resulting action items. Use when preparing contract negotiations, board meetings, compliance reviews, or any meeting where legal context, background research, or action follow-up is ne
Ready to connect★ 535
- View details
ops-status-reportSkillProductivity
Generate a status report with KPIs, risks, and action items. Use when writing a weekly or monthly update for leadership, summarizing project health with green/yellow/red status, surfacing risks and decisions that need stakeholder attention, or turning Linear activity into an executive narrative.
Ready to connect★ 535
- View details
meetingsSkillProductivity
Helps your agent decide if a meeting is worth having, price its cost, build a timed agenda, and turn notes into owned action items.
Ready to connect★ 533
What is a skill?
A skill is plain text, usually a SKILL.md file and the scripts it refers to, written for an AI rather than for a person. It carries the steps, the house rules and the examples a good answer needs, so you stop pasting the same briefing into every new chat.
53,462 of the 53,895 skills listed here can be served through ahel today, and they come from public repositories. Each one has its own page with the instructions themselves on it, so you can read what a skill will tell your AI to do before you install it.
Install one and every AI you use gets it
Installing a skill adds it to your gateway and turns it on in the same step. Claude Code surfaces it as a slash command; any client can read the full instructions with the skill_read tool.
Nothing is copied into a project folder. The instructions are served from your account, so the same skill is there in every AI you connect, and turning it off removes it from all of them at once.